| Cut lengths of Textra to height of wall, with 1" extra on each end. |
 |
|
Roll the entire strip of Textra. |
 |
| Roll adhesive on the wall area to be covered by the first strip. |
 |
|
Trim excess at edge where required. |
 |
| Apply the strip of Textra pressing into the adhesive with a trowel. |
 |
|
Trim upper and lower edges with a knife against a trimming trowel. |
 |
| On the next strips, match the weave pattern at the seam. On some patterns, black threads are woven in for easy alignment. |
 |
|
Apply two coats of your favorite color. |
 |
| Press down the entire strip of Textra with a wallcovering trowel. |
 |
Printer-friendly installation instructions
Printer-friendly repair information
Supplemental DurAcoustic™ instructions
